List of ads matching your search

ZIPP 30 COURSE TUBULAR DISC-BRAKE FRONT WHEEL
ZIPP 30 COURSE TUBULAR DISC-BRAKE FRONT WHEEL

Zipp’s carbon-rimmed disc brake wheels have been crushing it at the elite level. Not only has Jeremy Powers taken them to the top of the domestic heap, but the Cannondale cyclocross team has been using them to nip at Powers’ heels and leave the rest of the cyclocross competition behind. The Zipp 30 Corse Tubular Disc-Brake Wheel is their first aluminum-rimmed disc-brake tubular, and it is for anyone who wants sew-ups but isn’t ready for the cost of carbon. This wheel works on road bikes, adventure bikes, cyclocross bikes, and even 29ers. Anywhere you have disc brakes and want a strong, light, aero, reliable, aluminum tubular rim to hold up and shape your tires. The rim possesses a bead shape that makes the wheel tubeless-ready. The shape, with a 25mm exterior width and 26mm depth takes its shape cues from Zipp’s 202 Firecrest Carbon Clincher. The depth is paired with the width for increased air volume inside the tire, which means you can run lower pressure for greater comfort and still net out lower rolling resistance. When the rim cuts through the wind, it does so with very little effort, and the depth has little effect on crosswind stability. The hub set found here, called 77/177D, are already found on Zipp 202 and 303 Firecrest disc-brake wheels. The hubs are designed to be versatile. They have six-bolt mounting for rotors. They come with a disc-brake specific quick release, but the skewer and the hub end caps can easily be pulled by hand and swapped for thru-axle endcaps. Thus you can run either 12x100mm or 15x100mm in front and either 12x135mm or 12x142mm in the back. The axle itself has a 17mm diameter. Because of these needs, Zipp eliminated bearing pre-load and also improved the bearing shielding. These hubs take less work to maintain and roll just fine after your epic muddy cx race. All the same, the spokes are Sapim’s CX-Ray, which are the most aero spokes around, and will save you time every second of the ride. The wheels are sold separately. Each wheels comes with quick release hub end caps, thru-axle hub end caps, and Zipp skewer. When you buy the rear wheel version, it comes with either a Campagnolo-compatible 9/10/11-speed cassette body or a Shimano/SRAM-compatible cassette body with a 1.85mm spacer to run nine- or ten-speed cassettes. These can be swapped without re-dishing the wheel, and both can be pulled in favor of a SRAM XD driver body for even wider range of gearing. The 30 Course Tubular Disc-Brake is Zipp’s do-it-all tubular wheelset....

Bicycle Wheel Frame Zipp 

213 EUR

Nairobi
Kenya

02.08.2021
New

ZIPP 30 COURSE CLINCHER DISC-BRAKE FRONT WHEEL
ZIPP 30 COURSE CLINCHER DISC-BRAKE FRONT WHEEL

Zipp has been building disc-brake-specific wheels for years. Some of the earliest versions were built for the Cannondale cyclocross team and Jeremy Powers. These elite test mules helped identify strengths and weaknesses of initial designs and rode the way for the Zipp 30 Course Disc-Brake clincher. This wheel works on road bikes, adventure bikes, cyclocross bikes, and even 29ers. Anywhere you have disc brakes and want a strong, light, aero, reliable, aluminum rim to hold up and shape your tires. The rim possesses a bead shape that makes the wheel tubeless-ready. The shape, with a 25mm exterior width, 21mm internal width and 26mm depth takes its shape cues from Zipp’s 202 Firecrest Carbon Clincher. The depth is paired with the width for increased air volume inside the tire, which means you can run lower pressure for greater comfort and still net out lower rolling resistance. When the rim cuts through the wind, it does so with very little effort, and the depth has little effect on crosswind stability. The hub set found here, called 77/177D, are already found on Zipp 202 and 303 Firecrest disc-brake wheels. The hubs are designed to be versatile. They feature six-bolt mounting for rotors. They come with a disc-brake specific quick release, but the skewer and the hub end caps can easily be pulled by hand and swapped for thru-axle endcaps. Thus you can run either 12x100mm or 15x100mm in front and either 12x135mm or 12x142mm in the back. The axle itself has a 17mm diameter. Because of these needs, Zipp eliminated bearing pre-load and also improved the bearing shielding. These hubs take less work to maintain and roll just fine after your epic muddy cx race. They’re laced with Sapim’s aero CX-Ray spokes for road speed. The wheels are sold separately. Each wheels comes with quick release hub end caps, thru-axle hub end caps, Zipp skewer, Zipp rim tape, and Zipp tubeless valve. When you buy the rear wheel version, it comes with either a Campagnolo-compatible 9/10/11-speed cassette body or a Shimano/SRAM-compatible cassette body with a 1.85mm spacer to run nine- or ten-speed cassettes. These can be swapped without re-dishing the wheel, and both can be pulled in favor of a SRAM XD driver body for even wider range of gearing. The 30 Course Clincher Disc-Brake is Zipp’s do-it-all clincher wheelset for the rotor crowd....

Bicycle Wheel Frame Zipp 

213 EUR

Nairobi
Kenya

02.08.2021
New

ZIPP 202 NSW DISC TUBELESS CLINCHER REAR WHEEL
ZIPP 202 NSW DISC TUBELESS CLINCHER REAR WHEEL

When you’re looking for an ultra-light, aero, climbing disc-brake wheel, the one you’ll turn to is the Zipp 202 NSW Disc Tubeless Clincher. This is shallow, wide rim, that is best for those times when gravitational resistance is highest, and still has the aero advantages that will increase your speed when gravitational resistance is lowest, and all other times as well. Zipp, when they decided to focus on building disc brake-specific wheels, looked at not only what they could do for the rim, but what they could do with the bikes the wheels go in. For the first part, they knew that without the need for a brake track, they could extend their dimpling all the way to the end of the rim, as they did. For the second, they realized that most road bikes with disc brakes come with enough clearance for 28mm tires, so they designed with those in mind. With the dimpling they molded their SawTooth pattern into the exterior walls. As you should know by now, SawTooth is a design of indents molded into the outside rim walls that is comprised of twelve nodes. These are designed to start working for you at speeds of 20mph and then work better when faster. They essentially change the behavior of the wind around the rim to minimize side wind pressure on the rim in crosswinds, thus making the wheel more stable at high speeds. They also tweaked the rim shape, keeping the 32mm depth the 202 is known for, but increasing the max width of the rim to 28.9mm. The result is that the tire width that is most aerodynamic is 28mm. You can go wider for rough- and off-road adventures, but probably won’t want to go narrower than 25mm. The interior of the rim has been changed as well. the internal width is 21mm, and the side walls have ridges that help hold the tire in place when pressure is low. This is to improve the interface with tubeless tire beads. No burps when running wide tires at low pressures. Factory-applied tubeless rim tape finishes the rim package. You can run these wheels with tubed tires; you’ll just need to remove the valve stem from the rim. Thanks to the need to make the rim sidewalls strong enough to handle the pressure of clincher tires, these carbon rims are super-strong. Stronger than aluminum rims, so worry not about their durability. They are race light, but training wheel tough. Sapim CX-Ray J-Bend spokes are used both front and rear to lace the rim to the hub. These spokes are light, aero, and stiff. 24 spokes, two-cross, both front and rear. These NSW wheels utilize Zipp’s Cognition hubs. The front features scalloped flanges for the spoke beds. J-bend spokes resist the twisting forces disc-braking can put on spokes. This results in less pressure on the spokes, increasing lateral stiffness and durability. The rear has a pawl design with an Axial Clutch, which reduces pawl drag by 50% when coasting, and with a 36-tooth engagement, you’re driving the wheel the moment you start pedaling. The disc-mounting method is Centerlock only. Lock ring not included. The hubs come with Zipp’s Tangente quick release skewers as well as hand-removable end caps to fit 100x12mm and 100x15mm thru-axles in front and 142x12mm rear thru-axles. The wheels weigh in at 1475g per set, 695g in front, 780g in back. The wheels, sold separately as front and rear, also come with a wheel bag, a Zipp tubeless valve factory-installed, valve core removal tool, Zipp Cognition Oil, and a freehub body spacer to take the 11-speed hub down to 10-speed if you need. The single wheel bags can be secured together if you have a pair. A SRAM/Shimano 11-speed cassette body is standard, though a SRAM XD-R driver can be swapped in. The Zipp 202 NSW Disc Tubeless Clincher is the climbing wheel that will help your disc brake bike soar like an eagle both going up and down the mountain....

Bicycle Wheel Frame Zipp 

864 EUR

Nairobi
Kenya

02.08.2021
New

ZIPP 202 NSW DISC TUBELESS CLINCHER FRONT WHEEL
ZIPP 202 NSW DISC TUBELESS CLINCHER FRONT WHEEL

When you’re looking for an ultra-light, aero, climbing disc-brake wheel, the one you’ll turn to is the Zipp 202 NSW Disc Tubeless Clincher. This is shallow, wide rim, that is best for those times when gravitational resistance is highest, and still has the aero advantages that will increase your speed when gravitational resistance is lowest, and all other times as well. Zipp, when they decided to focus on building disc brake-specific wheels, looked at not only what they could do for the rim, but what they could do with the bikes the wheels go in. For the first part, they knew that without the need for a brake track, they could extend their dimpling all the way to the end of the rim, as they did. For the second, they realized that most road bikes with disc brakes come with enough clearance for 28mm tires, so they designed with those in mind. With the dimpling they molded their SawTooth pattern into the exterior walls. As you should know by now, SawTooth is a design of indents molded into the outside rim walls that is comprised of twelve nodes. These are designed to start working for you at speeds of 20mph and then work better when faster. They essentially change the behavior of the wind around the rim to minimize side wind pressure on the rim in crosswinds, thus making the wheel more stable at high speeds. They also tweaked the rim shape, keeping the 32mm depth the 202 is known for, but increasing the max width of the rim to 28.9mm. The result is that the tire width that is most aerodynamic is 28mm. You can go wider for rough- and off-road adventures, but probably won’t want to go narrower than 25mm. The interior of the rim has been changed as well. the internal width is 21mm, and the side walls have ridges that help hold the tire in place when pressure is low. This is to improve the interface with tubeless tire beads. No burps when running wide tires at low pressures. Factory-applied tubeless rim tape finishes the rim package. You can run these wheels with tubed tires; you’ll just need to remove the valve stem from the rim. Thanks to the need to make the rim sidewalls strong enough to handle the pressure of clincher tires, these carbon rims are super-strong. Stronger than aluminum rims, so worry not about their durability. They are race light, but training wheel tough. Sapim CX-Ray J-Bend spokes are used both front and rear to lace the rim to the hub. These spokes are light, aero, and stiff. 24 spokes, two-cross, both front and rear. These NSW wheels utilize Zipp’s Cognition hubs. The front features scalloped flanges for the spoke beds. J-bend spokes resist the twisting forces disc-braking can put on spokes. This results in less pressure on the spokes, increasing lateral stiffness and durability. The rear has a pawl design with an Axial Clutch, which reduces pawl drag by 50% when coasting, and with a 36-tooth engagement, you’re driving the wheel the moment you start pedaling. The disc-mounting method is Centerlock only. Lock ring not included. The hubs come with Zipp’s Tangente quick release skewers as well as hand-removable end caps to fit 100x12mm and 100x15mm thru-axles in front and 142x12mm rear thru-axles. The wheels weigh in at 1475g per set, 695g in front, 780g in back. The wheels, sold separately as front and rear, also come with a wheel bag, a Zipp tubeless valve factory-installed, valve core removal tool, Zipp Cognition Oil, and a freehub body spacer to take the 11-speed hub down to 10-speed if you need. The single wheel bags can be secured together if you have a pair. A SRAM/Shimano 11-speed cassette body is standard, though a SRAM XD-R driver can be swapped in. The Zipp 202 NSW Disc Tubeless Clincher is the climbing wheel that will help your disc brake bike soar like an eagle both going up and down the mountain....

Bicycle Wheel Frame Zipp 

672 EUR

Nairobi
Kenya

02.08.2021
New

2021 TREK PROJECT ONE EMONDA SLR 9 RED ETAP AXS DISC ROAD BIKE - (World Racycles)
2021 TREK PROJECT ONE EMONDA SLR 9 RED ETAP AXS DISC ROAD BIKE - (World Racycles)

SPECIFICATIONS: Frame: Trek Ultralight 800 Series OCLV Carbon, Ride Tuned performance tube optimisation, tapered head tube, internal routing, DuoTrap S compatible, flat mount disc, 142x12mm thru-axle Fork: Trek Émonda SLR full carbon, tapered carbon steerer, internal brake routing, flat mount disc, 12x100mm thru-axle Bottom Bracket: SRAM DUB, T47 threaded, internal bearing Stem: Bontrager Aeolus RSL Integrated bar/stem, OCLV Carbon, Di2 routing Handlebar: Bontrager Aeolus RSL Integrated bar/stem, OCLV Carbon, Di2 routing, 100mm reach, 124mm drop Front Brake: SRAM RED eTap AXS hydraulic disc, flat mount Rear Brake: SRAM RED eTap AXS hydraulic disc, flat mount Brake Levers: SRAM RED eTap AXS hydraulic disc Front Derailleur: SRAM RED eTap AXS, braze-on Rear Derailleur: SRAM RED eTap AXS, Orbit chain management, 33T max cog Shift Levers: SRAM RED eTap AXS, 12-speed Cassette: SRAM RED XG-1290, 10-33, 12-speed Crankset: SRAM RED Power Meter, 48/35, DUB spindle Front Wheel: Bontrager Aeolus RSL 37, OCLV Carbon, tubeless-ready, 37mm rim depth, 100x12mm Rear Wheel: Bontrager Aeolus RSL 37, OCLV Carbon, tubeless-ready, 37mm rim depth, 142x12mm Front Tyre: Bontrager R4 320 handmade clincher, Hard-Case Lite, 320 tpi, 700x25c Rear Tyre: Bontrager R4 320 handmade clincher, Hard-Case Lite, 320 tpi, 700x25c Saddle: Bontrager Aeolus Pro, carbon rails Seatpost: Bontrager carbon seatmast cap, 20mm offset Pedals: Not included Accessories: Includes SRAM/Quarq power meter Claimed Manufacturer Weight: 6.74kg size 56cm Visit our site to see more cataloq and discount price : https://worldracycles.com...

bicycles 

5502 EUR

Waddan
Libya

28.07.2021
New

2021 SPECIALIZED SAGAN COLLECTION S-WORKS TARMAC SL7 DI2 DISC ROAD BIKE - (World Racycles)
2021 SPECIALIZED SAGAN COLLECTION S-WORKS TARMAC SL7 DI2 DISC ROAD BIKE - (World Racycles)

2021 Specialized Sagan Collection S-Works Tarmac SL7 Di2 Disc Road Bike With more than a nod to his dominance of the Green Jersey competition at the Tour de France, the frame of the Specialized Sagan Collection S-Works Tarmac SL7 Di2 Disc Road Bike sparkles and flashes a verdant hue when it catches the light. The design of the SL7 frame combines the sublime handling and low weight of the SL6 with the aerodynamics, efficiency and outright speed of the Venge, making a truly remarkable machine that can take on climbs, sprints and rolling roads right at the front of the pack much like Sagan himself. By using their extensive FreeFoil Shape Library of tubes and their own Win Tunnel test facility, Specialized has ensured that no compromise is needed by their pro riders or amateurs when choosing the best bike for their day’s ride. An integrated stem and handlebar with internal routing add to the bike’s aerodynamic qualities and sleek lines. SPECIFICATIONS: Frame: Specialized S-Works Tarmac SL7 FACT 12r Carbon, Rider-First Engineered™, Win Tunnel Engineered, Clean Routing, Threaded BB, 12x142mm thru-axle, flat-mount disc Fork: Specialized S-Works FACT Carbon, 12x100mm thru-axle, flat-mount disc Bottom Bracket: Shimano Dura-Ace, BB-R9100 Stem: Specialized Tarmac integrated stem, 6-degree Handlebar: Specialized S-Works Aerofly II Bar Tape: Supacaz Super Sticky Kush Front Brake: Shimano Dura-Ace R9170, hydraulic disc Rear Brake: Shimano Dura-Ace R9170, hydraulic disc Brake Levers: Shimano Dura-Ace Di2 R9170 Front Derailleur: Shimano Dura-Ace Di2 R9150, braze-on Rear Derailleur: Shimano Dura-Ace Di2 R9150, 11-speed Shift Levers: Shimano Dura-Ace Di2 R9170, 11-speed Chain: Shimano Dura-Ace, 11-speed Cassette: Shimano Dura-Ace R9100, 11-speed, 11-30t Crankset: Shimano Dura-Ace R9100, HollowTech 2, 52/36t, 11-speed, dual-sided Specialized Power Pods power meter Front Wheel: Roval Rapide CLX, 21mm internal width carbon rim, 51mm depth, Win Tunnel Engineered, Roval AFD hub, 18 DT Swiss Aerolite spokes Rear Wheel: Roval Rapide CLX, 21mm internal width carbon rim, 60mm depth, Win Tunnel Engineered, Roval AFD hub, 24 DT Swiss Aerolite spokes Front Tyre: Specialized S-Works Turbo Cotton, 320 TPI, 700x26mm, clincher Rear Tyre: Specialized S-Works Turbo Cotton, 320 TPI, 700x26mm, clincher Saddle: Specialized Body Geometry S-Works Power, carbon fibre rails, carbon fibre base Seatpost: Specialized 2021 S-Works Tarmac, FACT Carbon, Di2 compatible, 20mm offset Pedals: Available to purchase separately Visit our site to see more cataloq and discount price : https://worldracycles.com...

bicycles 

6179 EUR

Mbabane
Swaziland

28.07.2021
New

2021 SPECIALIZED S-WORKS TARMAC SL7 RED ETAP AXS 12-SPEED DISC ROAD BIKE (World Racycles)
2021 SPECIALIZED S-WORKS TARMAC SL7 RED ETAP AXS 12-SPEED DISC ROAD BIKE (World Racycles)

SPECIFICATIONS: Frame: Specialized S-Works Tarmac SL7 FACT 12r Carbon, Rider-First Engineered™, Win Tunnel Engineered, Clean Routing, Threaded BB, 12x142mm thru-axle, flat-mount disc Fork: Specialized S-Works FACT Carbon, 12x100mm thru-axle, flat-mount disc Bottom Bracket: SRAM DUB BSA 68 Stem: Specialized Tarmac integrated stem, 6-degree Handlebar: Specialized S-Works Aerofly II Bar Tape: Supacaz Super Sticky Kush Front Brake: SRAM RED eTap AXS hydraulic disc Rear Brake: SRAM RED eTap AXS hydraulic disc Brake Levers: SRAM RED HRD Front Derailleur: SRAM RED eTap AXS, braze-on Rear Derailleur: SRAM RED eTap AXS, 12-speed Shift Levers: SRAM RED eTap AXS HRD, 12-speed Chain: SRAM RED, 12-speed Cassette: SRAM RED XG-1290, 12-speed, 10-33t Crankset: SRAM RED AXS 48/35 with Quarq power meter Front Wheel: Roval Rapide CLX, 21mm internal width carbon rim, 51mm depth, Win Tunnel Engineered, Roval AFD hub, 18 DT Swiss Aerolite spokes Rear Wheel: Roval Rapide CLX, 21mm internal width carbon rim, 60mm depth, Win Tunnel Engineered, Roval AFD hub, 24 DT Swiss Aerolite spokes Front Tyre: Specialized S-Works Turbo Cotton, 320 TPI, 700x26mm, clincher Rear Tyre: Specialized S-Works Turbo Cotton, 320 TPI, 700x26mm, clincher Saddle: Specialized Body Geometry S-Works Power, carbon fibre rails, carbon fibre base Seatpost: Specialized 2021 S-Works Tarmac, FACT Carbon, Di2 compatible, 20mm offset Pedals: Available to purchase separately Visit our site to see more cataloq and discount price : https://worldracycles.com...

bicycles 

5923 EUR

Djibo
Burkina Faso

28.07.2021
New