Kemiio Help

  New ad /
Article

  New shop /
company


ZIPP 30 COURSE TUBULAR DISC-BRAKE FRONT WHEEL

213 EUR
  • Share on social media

Zipp’s carbon-rimmed disc brake wheels have been crushing it at the elite level. Not only has Jeremy Powers taken them to the top of the domestic heap, but the Cannondale cyclocross team has been using them to nip at Powers’ heels and leave the rest of the cyclocross competition behind. The Zipp 30 Corse Tubular Disc-Brake Wheel is their first aluminum-rimmed disc-brake tubular, and it is for anyone who wants sew-ups but isn’t ready for the cost of carbon.

This wheel works on road bikes, adventure bikes, cyclocross bikes, and even 29ers. Anywhere you have disc brakes and want a strong, light, aero, reliable, aluminum tubular rim to hold up and shape your tires.

The rim possesses a bead shape that makes the wheel tubeless-ready. The shape, with a 25mm exterior width and 26mm depth takes its shape cues from Zipp’s 202 Firecrest Carbon Clincher. The depth is paired with the width for increased air volume inside the tire, which means you can run lower pressure for greater comfort and still net out lower rolling resistance. When the rim cuts through the wind, it does so with very little effort, and the depth has little effect on crosswind stability.

The hub set found here, called 77/177D, are already found on Zipp 202 and 303 Firecrest disc-brake wheels. The hubs are designed to be versatile. They have six-bolt mounting for rotors. They come with a disc-brake specific quick release, but the skewer and the hub end caps can easily be pulled by hand and swapped for thru-axle endcaps. Thus you can run either 12x100mm or 15x100mm in front and either 12x135mm or 12x142mm in the back. The axle itself has a 17mm diameter. Because of these needs, Zipp eliminated bearing pre-load and also improved the bearing shielding. These hubs take less work to maintain and roll just fine after your epic muddy cx race. All the same, the spokes are Sapim’s CX-Ray, which are the most aero spokes around, and will save you time every second of the ride.

The wheels are sold separately. Each wheels comes with quick release hub end caps, thru-axle hub end caps, and Zipp skewer. When you buy the rear wheel version, it comes with either a Campagnolo-compatible 9/10/11-speed cassette body or a Shimano/SRAM-compatible cassette body with a 1.85mm spacer to run nine- or ten-speed cassettes. These can be swapped without re-dishing the wheel, and both can be pulled in favor of a SRAM XD driver body for even wider range of gearing.

The 30 Course Tubular Disc-Brake is Zipp’s do-it-all tubular wheelset.

Town / City / village:Nairobi - Kenya
Creation Date02.08.2021
Ad number:17509
CategorySports & Entertainment
Keywords:Bicycle, Wheel, Frame, Zipp

Send a message to user


  Other Ads from this advertiser

  Report inappropriate Content

 Our recommendations and advices
In general we believe that all our announcer and services providers are genuine. But In order to avoid been fooled and for your own personal safety, always meet the seller in a public places or at least not in isolated places. It's probably a good idea if you bring a friend as well to witness the transaction

Other Ads from this advertiser More similar ads

ZIPP 30 COURSE TUBULAR DISC-BRAKE FRONT WHEEL
ZIPP 30 COURSE TUBULAR DISC-BRAKE FRONT WHEEL

Zipp’s carbon-rimmed disc brake wheels have been crushing it at the elite level. Not only has Jeremy Powers taken them to the top of the domestic heap, but the Cannondale cyclocross team has been using them to nip at Powers’ heels and leave the rest of the cyclocross competition behind. The Zipp 30 Corse Tubular Disc-Brake Wheel is their first aluminum-rimmed disc-brake tubular, and it is for anyone who wants sew-ups but isn’t ready for the cost of carbon. This wheel works on road bikes, adventure bikes, cyclocross bikes, and even 29ers. Anywhere you have disc brakes and want a strong, light, aero, reliable, aluminum tubular rim to hold up and shape your tires. The rim possesses a bead shape that makes the wheel tubeless-ready. The shape, with a 25mm exterior width and 26mm depth takes its shape cues from Zipp’s 202 Firecrest Carbon Clincher. The depth is paired with the width for increased air volume inside the tire, which means you can run lower pressure for greater comfort and still net out lower rolling resistance. When the rim cuts through the wind, it does so with very little effort, and the depth has little effect on crosswind stability. The hub set found here, called 77/177D, are already found on Zipp 202 and 303 Firecrest disc-brake wheels. The hubs are designed to be versatile. They have six-bolt mounting for rotors. They come with a disc-brake specific quick release, but the skewer and the hub end caps can easily be pulled by hand and swapped for thru-axle endcaps. Thus you can run either 12x100mm or 15x100mm in front and either 12x135mm or 12x142mm in the back. The axle itself has a 17mm diameter. Because of these needs, Zipp eliminated bearing pre-load and also improved the bearing shielding. These hubs take less work to maintain and roll just fine after your epic muddy cx race. All the same, the spokes are Sapim’s CX-Ray, which are the most aero spokes around, and will save you time every second of the ride. The wheels are sold separately. Each wheels comes with quick release hub end caps, thru-axle hub end caps, and Zipp skewer. When you buy the rear wheel version, it comes with either a Campagnolo-compatible 9/10/11-speed cassette body or a Shimano/SRAM-compatible cassette body with a 1.85mm spacer to run nine- or ten-speed cassettes. These can be swapped without re-dishing the wheel, and both can be pulled in favor of a SRAM XD driver body for even wider range of gearing. The 30 Course Tubular Disc-Brake is Zipp’s do-it-all tubular wheelset....

Bicycle Wheel Frame Zipp 

213 EUR

Nairobi
Kenya

02.08.2021

ZIPP 30 COURSE CLINCHER DISC-BRAKE FRONT WHEEL
ZIPP 30 COURSE CLINCHER DISC-BRAKE FRONT WHEEL

Zipp has been building disc-brake-specific wheels for years. Some of the earliest versions were built for the Cannondale cyclocross team and Jeremy Powers. These elite test mules helped identify strengths and weaknesses of initial designs and rode the way for the Zipp 30 Course Disc-Brake clincher. This wheel works on road bikes, adventure bikes, cyclocross bikes, and even 29ers. Anywhere you have disc brakes and want a strong, light, aero, reliable, aluminum rim to hold up and shape your tires. The rim possesses a bead shape that makes the wheel tubeless-ready. The shape, with a 25mm exterior width, 21mm internal width and 26mm depth takes its shape cues from Zipp’s 202 Firecrest Carbon Clincher. The depth is paired with the width for increased air volume inside the tire, which means you can run lower pressure for greater comfort and still net out lower rolling resistance. When the rim cuts through the wind, it does so with very little effort, and the depth has little effect on crosswind stability. The hub set found here, called 77/177D, are already found on Zipp 202 and 303 Firecrest disc-brake wheels. The hubs are designed to be versatile. They feature six-bolt mounting for rotors. They come with a disc-brake specific quick release, but the skewer and the hub end caps can easily be pulled by hand and swapped for thru-axle endcaps. Thus you can run either 12x100mm or 15x100mm in front and either 12x135mm or 12x142mm in the back. The axle itself has a 17mm diameter. Because of these needs, Zipp eliminated bearing pre-load and also improved the bearing shielding. These hubs take less work to maintain and roll just fine after your epic muddy cx race. They’re laced with Sapim’s aero CX-Ray spokes for road speed. The wheels are sold separately. Each wheels comes with quick release hub end caps, thru-axle hub end caps, Zipp skewer, Zipp rim tape, and Zipp tubeless valve. When you buy the rear wheel version, it comes with either a Campagnolo-compatible 9/10/11-speed cassette body or a Shimano/SRAM-compatible cassette body with a 1.85mm spacer to run nine- or ten-speed cassettes. These can be swapped without re-dishing the wheel, and both can be pulled in favor of a SRAM XD driver body for even wider range of gearing. The 30 Course Clincher Disc-Brake is Zipp’s do-it-all clincher wheelset for the rotor crowd....

Bicycle Wheel Frame Zipp 

213 EUR

Nairobi
Kenya

02.08.2021

ZIPP 202 NSW DISC TUBELESS CLINCHER REAR WHEEL
ZIPP 202 NSW DISC TUBELESS CLINCHER REAR WHEEL

When you’re looking for an ultra-light, aero, climbing disc-brake wheel, the one you’ll turn to is the Zipp 202 NSW Disc Tubeless Clincher. This is shallow, wide rim, that is best for those times when gravitational resistance is highest, and still has the aero advantages that will increase your speed when gravitational resistance is lowest, and all other times as well. Zipp, when they decided to focus on building disc brake-specific wheels, looked at not only what they could do for the rim, but what they could do with the bikes the wheels go in. For the first part, they knew that without the need for a brake track, they could extend their dimpling all the way to the end of the rim, as they did. For the second, they realized that most road bikes with disc brakes come with enough clearance for 28mm tires, so they designed with those in mind. With the dimpling they molded their SawTooth pattern into the exterior walls. As you should know by now, SawTooth is a design of indents molded into the outside rim walls that is comprised of twelve nodes. These are designed to start working for you at speeds of 20mph and then work better when faster. They essentially change the behavior of the wind around the rim to minimize side wind pressure on the rim in crosswinds, thus making the wheel more stable at high speeds. They also tweaked the rim shape, keeping the 32mm depth the 202 is known for, but increasing the max width of the rim to 28.9mm. The result is that the tire width that is most aerodynamic is 28mm. You can go wider for rough- and off-road adventures, but probably won’t want to go narrower than 25mm. The interior of the rim has been changed as well. the internal width is 21mm, and the side walls have ridges that help hold the tire in place when pressure is low. This is to improve the interface with tubeless tire beads. No burps when running wide tires at low pressures. Factory-applied tubeless rim tape finishes the rim package. You can run these wheels with tubed tires; you’ll just need to remove the valve stem from the rim. Thanks to the need to make the rim sidewalls strong enough to handle the pressure of clincher tires, these carbon rims are super-strong. Stronger than aluminum rims, so worry not about their durability. They are race light, but training wheel tough. Sapim CX-Ray J-Bend spokes are used both front and rear to lace the rim to the hub. These spokes are light, aero, and stiff. 24 spokes, two-cross, both front and rear. These NSW wheels utilize Zipp’s Cognition hubs. The front features scalloped flanges for the spoke beds. J-bend spokes resist the twisting forces disc-braking can put on spokes. This results in less pressure on the spokes, increasing lateral stiffness and durability. The rear has a pawl design with an Axial Clutch, which reduces pawl drag by 50% when coasting, and with a 36-tooth engagement, you’re driving the wheel the moment you start pedaling. The disc-mounting method is Centerlock only. Lock ring not included. The hubs come with Zipp’s Tangente quick release skewers as well as hand-removable end caps to fit 100x12mm and 100x15mm thru-axles in front and 142x12mm rear thru-axles. The wheels weigh in at 1475g per set, 695g in front, 780g in back. The wheels, sold separately as front and rear, also come with a wheel bag, a Zipp tubeless valve factory-installed, valve core removal tool, Zipp Cognition Oil, and a freehub body spacer to take the 11-speed hub down to 10-speed if you need. The single wheel bags can be secured together if you have a pair. A SRAM/Shimano 11-speed cassette body is standard, though a SRAM XD-R driver can be swapped in. The Zipp 202 NSW Disc Tubeless Clincher is the climbing wheel that will help your disc brake bike soar like an eagle both going up and down the mountain....

Bicycle Wheel Frame Zipp 

864 EUR

Nairobi
Kenya

02.08.2021

ZIPP 202 NSW DISC TUBELESS CLINCHER FRONT WHEEL
ZIPP 202 NSW DISC TUBELESS CLINCHER FRONT WHEEL

When you’re looking for an ultra-light, aero, climbing disc-brake wheel, the one you’ll turn to is the Zipp 202 NSW Disc Tubeless Clincher. This is shallow, wide rim, that is best for those times when gravitational resistance is highest, and still has the aero advantages that will increase your speed when gravitational resistance is lowest, and all other times as well. Zipp, when they decided to focus on building disc brake-specific wheels, looked at not only what they could do for the rim, but what they could do with the bikes the wheels go in. For the first part, they knew that without the need for a brake track, they could extend their dimpling all the way to the end of the rim, as they did. For the second, they realized that most road bikes with disc brakes come with enough clearance for 28mm tires, so they designed with those in mind. With the dimpling they molded their SawTooth pattern into the exterior walls. As you should know by now, SawTooth is a design of indents molded into the outside rim walls that is comprised of twelve nodes. These are designed to start working for you at speeds of 20mph and then work better when faster. They essentially change the behavior of the wind around the rim to minimize side wind pressure on the rim in crosswinds, thus making the wheel more stable at high speeds. They also tweaked the rim shape, keeping the 32mm depth the 202 is known for, but increasing the max width of the rim to 28.9mm. The result is that the tire width that is most aerodynamic is 28mm. You can go wider for rough- and off-road adventures, but probably won’t want to go narrower than 25mm. The interior of the rim has been changed as well. the internal width is 21mm, and the side walls have ridges that help hold the tire in place when pressure is low. This is to improve the interface with tubeless tire beads. No burps when running wide tires at low pressures. Factory-applied tubeless rim tape finishes the rim package. You can run these wheels with tubed tires; you’ll just need to remove the valve stem from the rim. Thanks to the need to make the rim sidewalls strong enough to handle the pressure of clincher tires, these carbon rims are super-strong. Stronger than aluminum rims, so worry not about their durability. They are race light, but training wheel tough. Sapim CX-Ray J-Bend spokes are used both front and rear to lace the rim to the hub. These spokes are light, aero, and stiff. 24 spokes, two-cross, both front and rear. These NSW wheels utilize Zipp’s Cognition hubs. The front features scalloped flanges for the spoke beds. J-bend spokes resist the twisting forces disc-braking can put on spokes. This results in less pressure on the spokes, increasing lateral stiffness and durability. The rear has a pawl design with an Axial Clutch, which reduces pawl drag by 50% when coasting, and with a 36-tooth engagement, you’re driving the wheel the moment you start pedaling. The disc-mounting method is Centerlock only. Lock ring not included. The hubs come with Zipp’s Tangente quick release skewers as well as hand-removable end caps to fit 100x12mm and 100x15mm thru-axles in front and 142x12mm rear thru-axles. The wheels weigh in at 1475g per set, 695g in front, 780g in back. The wheels, sold separately as front and rear, also come with a wheel bag, a Zipp tubeless valve factory-installed, valve core removal tool, Zipp Cognition Oil, and a freehub body spacer to take the 11-speed hub down to 10-speed if you need. The single wheel bags can be secured together if you have a pair. A SRAM/Shimano 11-speed cassette body is standard, though a SRAM XD-R driver can be swapped in. The Zipp 202 NSW Disc Tubeless Clincher is the climbing wheel that will help your disc brake bike soar like an eagle both going up and down the mountain....

Bicycle Wheel Frame Zipp 

672 EUR

Nairobi
Kenya

02.08.2021

ZIPP 202 FIRECREST DISC TUBELESS CLINCHER REAR WHEEL
ZIPP 202 FIRECREST DISC TUBELESS CLINCHER REAR WHEEL

Zipp has expanded their Firecrest line to include a climbing disc-brake compatible tubeless clincher wheel. The 202 Firecrest Disc Tubeless Clincher is that wheel. It’s not a mere re-naming of a 202 Firecrest, but an extensive redesign that keeps the 202 rim principles, but modifies and optimizes for not only disc brakes, but aerodynamics, and tubeless tires. The 202 is the shallowest and lightest rim of the Firecrest line. It is good for climbing, for low-speed riding, for cyclocross, and any time feel that weight savings takes a premium over aerodynamics. Before embarking on designing carbon clinchers, Zipp benchmarked impact strength of aluminum rims. They knew they had to exceed that impact strength before they’d feel ready bringing a carbon clincher to market. They exceeded and then some. The rim is disc-brake specific. Take notice of the brake track. That’s right, it’s gone and ABLC dimples go all the way up the sides for better aerodynamics. this is Zipp’s third-generation dimpling, and is specific to the wheel depth and shape. This is a new design all the way through, with not only the rim shape changed, but the material moved around. The rim remains 32mm deep, but the width has mushroomed out to 28.9mm from 25.4mm, and the internal width 21mm. As you can imagine the shape means wider tires. 25mm is as narrow as you’ll want to go, but the 28mm width offers better aerodynamics still and going even wider still offers great aerodynamics. This rim works best with wide tires. It’s also stronger. Without having to deal with the force of brakes squeezing the rim, they were able to move material around. And the strength you can rely on. Feel free to drop the tire pressure. Not only will the rim withstand whatever you’re putting in front of it, but the molded internal ridges lock tires in place, even at low pressures. Zipp employs their 77/177D hub set, which was purpose-built for disc braking. There are 24 aero Sapim CX-Ray spokes, both front and rear. A cross pattern is necessary in front to counter the forces of braking. The flanges are slightly taller to work around the six-hole rotor mounts and the 17mm axle. While you can see that the spokes have a two-cross pattern, it actually possesses the lateral stiffness of a three-cross thanks to the size of the flanges and the orientation of the spokes. The benefits of the design are more aero and shorter spokes. The rotor mounting method is six-bolt. The front wheel weighs in at 705g, the rear 825g. Maximum recommended tire pressure is 125psi, which should be overkill for any tire you’d want to install on this wheel. Maximum recommended rider weight is 250lbs. For rear wheels, Zipp offers both a Campagnolo-compatible, and Shimano/SRAM-compatible cassette body. The latter comes with a spacer for 9/10/11-speed cassettes. In both cases, the 177D hub body allows you to install a SRAM XDR Driver body for super-wide range gearing. The wheel comes with quick releases and endcaps to convert the hub for thru-axle or quick-release use. The included endcaps can convert the front wheel from 100x12mm to 100x15mm to quick release. The rear has endcaps for 142x12mm and quick release. They also include a spacer to convert the cassette body from eleven-speed to ten-speed. Also included are: rim strip and a tubeless valve, both installed at the factory, and a valve core removal tool. The Zipp 202 Firecrest Carbon Clincher Tubeless Disc Brake wheelset is light, aero, and tough enough for the roughest cyclocross, or gravel racing, has to offer....

Bicycle Wheel Frame Zipp 

544 EUR

Nairobi
Kenya

02.08.2021

Other Ads that may also interest you More similar ads

2024 Canyon Grail CFR LTD Road Bike (GUN2BIKESHOP)
2024 Canyon Grail CFR LTD Road Bike (GUN2BIKESHOP)

Buy New 2024 Canyon Grail CFR LTD Road Bike Price : USD 6000 Min Order : 1 Unit Lead Time : 6 - 9 Days Port : CIF / Juanda International Airport Payment :  Payment via PayPal, Bank Wire Transfer (T/T), Western Union (WU), Wise Transfer, World Remit, MoneyGram International and Xoom Shipment : FedEx, DHL, UPS Product : New Original and Warranty Gun2bikeshop is 100% safe, because purchase products at Gun2bikeshop provide a100% moneyback guarantee. Gun2bikeshop Address : Jl.Mayjend Sungkono No.108, Kutoanyar, Jawa Timur 66215 - Indonesia Site us : www.gun2bikeshop.com Contact Purchase : order@gun2bikeshop.com Phone/Whatsapp : +6282320105427 SPECIFICATION : FRAME Canyon Grail CFR, Superlight pro-level build of the latest-generation Grail gravel race bike. Benchmark stiffness-to-weight, more capable geometry, aero tube forms, integrated LOAD down tube storage, top tube mounts and strapless bag compatibility., Axle dimension: 12x142 mm, Tyre Clearance: 42 mm, Material: Carbon (CFR) BB Standard: BB86/BB92, 86mm, Press Fit Hanger Standard: UDH Tire Clearance: 42c FORK Canyon FK0118 Disc, Robust, stiff, compliant carbon fork. Compatible with LOAD Fork Sleeve Quickloader system for modular, secure storage., Material: Carbon (CF) BOTTOM BRACKET SRAM DUB Pressfit, Bottom bracket standard: PF 86,5, Weight: 78 g SADDLE Fizik Terra Argo X1 SEATPOST Canyon SP0072, Material: Carbon (CF) Type:Rigid PEDALS None included RIMS DT Swiss GRC1100, Axle dimension: 12x100 mm, Rotor mount: Center Lock, Rim height: 42 mm, Weight: 741 g | DT Swiss GRC1100 XDR, Axle dimension: 12x142 mm, Rotor mount: Center Lock, Rim height: 42 mm, Weight: 845 g TIRES Schwalbe G-One RS Evo, Width: 40mm DISC ROTORS SRAM Centerline X, Size: 160 mm, Weight: 130 g REAR DERAILLEUR SRAM Red XPLR eTap AXS D1 FRONT DERAILLEUR Canyon EP1839-01 Blind Plate CRANK SRAM Red AXS D1, Number of chainrings: 1 POWER METER SRAM Red AXS D1, Number of chainrings: 1 SHIFTERS SRAM RED eTap AXS HRD | SRAM RED eTap AXS HRD 12s CASSETTE SRAM Force XPLR XG-1271, 12-speed, 10-44, Number of sprockets: 12 CHAIN SRAM RED D1 BRAKES Hydraulic Disc BRAKE LEVERS SRAM RED eTap AXS HRD | SRAM RED eTap AXS HRD 12s ...

Bicycles Road Bikes Sport 

Fix price:
KSh 959955

Nairobi
Kenya

02.02.2024

2024 Canyon Grail CFR Di2 Road Bike (GUN2BIKESHOP)
2024 Canyon Grail CFR Di2 Road Bike (GUN2BIKESHOP)

Buy New 2024 Canyon Grail CFR Di2 Road Bike Price : USD 5500 Min Order : 1 Unit Lead Time : 6 - 9 Days Port : CIF / Juanda International Airport Payment :  Payment via PayPal, Bank Wire Transfer (T/T), Western Union (WU), Wise Transfer, World Remit, MoneyGram International and Xoom Shipment : FedEx, DHL, UPS Product : New Original and Warranty Gun2bikeshop is 100% safe, because purchase products at Gun2bikeshop provide a100% moneyback guarantee. Gun2bikeshop Address : Jl.Mayjend Sungkono No.108, Kutoanyar, Jawa Timur 66215 - Indonesia Site us : www.gun2bikeshop.com Contact Purchase : order@gun2bikeshop.com Phone/Whatsapp : +6282320105427 SPECIFICATION : FRAME Canyon Grail CFR, Axle dimension: 12x142 mm, Tyre Clearance: 42 mm, Material: Carbon (CFR) BB Standard: BB86/BB92, 86mm, Press Fit Hanger Standard: UDH Tire Clearance: 42c FORK Canyon FK0118 CF Disc, Material: Carbon (CF) BOTTOM BRACKET Token Ninja Lite BB4124, Bottom bracket standard: PF 86,5, Weight: 85 g | Ceramicspeed BB86 Shimano PressFit Bottom Bracket | Shimano SM-BB72-41B II Press-Fit Bottom Bracket SADDLE Fizik Terra Argo X1 SEATPOST Canyon SP0072, Material: Carbon (CF) Type: Rigid PEDALS None included RIMS DT Swiss GRC1100, Axle dimension: 12x100 mm, Rotor mount: Center Lock, Rim height: 42 mm, Weight: 741 g | DT Swiss GRC1100, Axle dimension: 12x142 mm, Rotor mount: Center Lock, Rim height: 42 mm, Weight: 848 g TIRES Schwalbe G-One RS Evo, Width: 40mm | Schwalbe G-One Bite 27.5" & 28" Gravel Tyre DISC ROTORS Shimano Deore XT MT800, Size: 160 mm | Shimano RT-MT800 Brake Rotor 160mm REAR DERAILLEUR Shimano RD-RX815, Cage length: long, Weight: 308 g FRONT DERAILLEUR Shimano GRX Di2 RX815 CRANK Shimano RX810, Number of chainrings: 2 SHIFTERS Shimano GRX Di2 RX815 CASSETTE Shimano Ultegra HG800 11-34 11s, Number of sprockets: 11 | Shimano Ultegra CS-HG800 11-speed Cassette 11-34 CHAIN Shimano CN-HG701 11s | Shimano 11-speed Quick-Link Chain Connector | Shimano CN-HG701 GRX 11-speed Chain 138 Links BRAKES Hydraulic Disc BRAKE LEVERS Shimano GRX Di2 RX815 ...

Bicycles Road Bikes Sport 

Fix price:
KSh 879935

Nairobi
Kenya

02.02.2024

2024 Giant TCR Advanced Pro Disc 0 AXS Road Bike (GUN2BIKESHOP)
2024 Giant TCR Advanced Pro Disc 0 AXS Road Bike (GUN2BIKESHOP)

Buy New 2024 Giant TCR Advanced Pro Disc 0 AXS Road Bike Price : USD 5000 Min Order : 1 Unit Lead Time : 6 - 9 Days Port : CIF / Juanda International Airport Payment :  Payment via PayPal, Bank Wire Transfer (T/T), Western Union (WU), Wise Transfer, World Remit, MoneyGram International and Xoom Shipment : FedEx, DHL, UPS Product : New Original and Warranty Gun2bikeshop is 100% safe, because purchase products at Gun2bikeshop provide a100% moneyback guarantee. Gun2bikeshop Address : Jl.Mayjend Sungkono No.108, Kutoanyar, Jawa Timur 66215 - Indonesia Site us : www.gun2bikeshop.com Contact Purchase : order@gun2bikeshop.com Phone/Whatsapp : +6282320105427 SPECIFICATION FRAME Advanced-grade composite, disc FORK Advanced-grade composite, full-composite OverDrive 2 steerer, disc SHOCK N/A HANDLEBAR Giant Contact SLR XS:40cm, S:40cm, M:42cm, M/L:42cm, L:44cm, XL:44cm GRIPS Stratus Lite 2.0 STEM Giant Contact SL XS:80mm, S:90mm, M:100mm, M/L:110mm, L:110mm, XL:120mm SEATPOST Giant Variant, composite, -5/+15mm offset SADDLE Giant Fleet SL PEDALS N/A SHIFTERS SRAM Force AXS FRONT DERAILLEUR SRAM Force AXS REAR DERAILLEUR SRAM Force AXS BRAKES SRAM Force AXS hydraulic, SRAM CenterLine XR rotors [F]160mm, [R]140mm BRAKE LEVERS SRAM Force eTap AXS hydraulic CASSETTE SRAM Force, 12-speed, 10x33 CHAIN SRAM Force D1 CRANKSET SRAM Force D1 DUB, 33/46with Quarq Dzero power meter XS:170mm, S:170mm, M:172.5mm, M/L:172.5mm, L:175mm, XL:175mm BOTTOM BRACKET SRAM DUB, press fit RIMS Giant SLR 1 36 Carbon Disc WheelSystem, [F] 36mm, [R] 36mm HUBS [F] Giant Low Friction Hub, CenterLock, 12mm thru-axle [R] Giant Low Friction Hub, 30t ratchet driver, CenterLock, 12mm thru-axle SPOKES Sapim CX-Ray TYRES CADEX Race, tubeless, 700x25c (26.5mm), folding EXTRAS computer mount, tubeless prepared, 32mm max tire size WEIGHT The most accurate way to determine any bike’s weight is to have your local dealer weigh it for you. Many brands strive to list the lowest possible weight, but in reality weight can vary based on size, finish, hardware and accessories. All our bikes are designed for best-in-class weight and ride quality. ...

Bicycles Road Bikes Sport 

Fix price:
KSh 799968

Nairobi
Kenya

02.02.2024

26inch War Eagle MTB mountain bike Jiangwo
26inch War Eagle MTB mountain bike Jiangwo

Spec: 26inch Unit: piece Memo: Accept OEM ...

Mtb bike MTB mountain bike mountain bicycle 

Price negotiable:
KSh 100

Nairobi
Kenya

26.07.2023

2022 BMC Roadmachine 01 Four Road Bike (CENTRACYCLES)
2022 BMC Roadmachine 01 Four Road Bike (CENTRACYCLES)

Buy New 2022 BMC Roadmachine 01 Four Road Bike Price : USD 4,610.00 Min Order : 1 Unit Lead Time : 6 - 9 Days Port : CIF / Kualanamu International Airport Payment :  Wise, Bank Transfer, Western union, Xoom, Moneygram & Worldremit Shipment : FedEx, DHL, UPS Product : New Original and Warranty Centracycles is 100% safe, because purchase products at Centracycles provide a100% moneyback guarantee. Centracycles Address : Jl. M. T. Haryono No.95B, Medan - 20212, Sumatera Utara - Indonesia. Site us : www.centracycles.com Contact Purchase : order@centracycles.com Phone/Whatsapp : +6281375278047 ...

Bicycles Road Bike BMC 

4197 EUR

Nairobi
Kenya

12.04.2023